Correct Plugs For 84 235 Crossflow

[Crossflow235]

Hello Looing for correct plugs for my 1984 235 Crossflow.<br /><br />Currently using Champion UL77V. Champion web site recommends the QL16V Plug. What do you think?<br /><br />Current plugs are wet and have unburned oil on them every time I pull them.<br /><br />Jetting is correct for my altitude, and compression is fine. I am suspecting the plugs I am using are too cold.<br /><br />Thanks for the help<br /><br />SRP71

 

[P.V.]

Re: Correct Plugs For 84 235 Crossflow

Affordable plugs are the UL77V, the QL16's are too expensive for most of us to use (with marginal benefits)!

 

[Crossflow235]

Re: Correct Plugs For 84 235 Crossflow

Thanks for the advice. you just saved me over 30.00<br /><br />I was afraid that the cost wouldn't overcome the benefits.<br /><br />Thanks for the confirmation.<br /><br /><br />Srp71

 

[walleyehed]

Re: Correct Plugs For 84 235 Crossflow

The plugs are only a good indicator if you are running WOT for a few minutes and just shut the key off while "at" wide open throt. When ya stop, pull plugs one at a time and look. you can't get a good idea of whats going on by checking plugs after you've idled down.

 

[jy118lfd]

Re: Correct Plugs For 84 235 Crossflow

I wish I read this post first. Just bought a set of QL16v for my 83 150 crossflow I thought the plugs were superceded, plus my parts dealer would only sell me a set of 4 so I bought 8 plugs The only saving grace is that I get parts at cost so plugs were only!! 5.00 ea

 

[Dhadley]

Re: Correct Plugs For 84 235 Crossflow

You can also use the (Q)L77JC4's.