correct kits

[chadchurchill]

I'm trying to find the correct kits for rebuilding my carbs and my water pump. So far I have found the kit for the waterpump here at iboats, but couldn't find the right kit for my carbs. The motor is a 1986 Mercury 75 hp 4 cylinder, serial #: a198778. I would like to rebuild these over the winter. I have the Clymer manual which doesn't seem to have much info on this particular model. Does the Seloc manual have any better or easier to understand info?<br /><br />Thank you,<br /><br />TripleC

 

[jimalsk]

Re: correct kits

TripleC I have a 1985 75 hp 4cyl.I also had trouble finding carb kits. This site may help "www.maxrules.com". My problem was I could not find complete kits either,the kits are discontinued. I bought the jets,needle,seat, and gaskets seperately. You have model "C" carbs.I think your carbs are WM15 and WM17. The Seloc manual explains all three types easily.

 

[DHPMARINE]

Re: correct kits

TripleC,<br /><br />Carb kits for your motor:<br /><br />WM 14 or WM 17 #812953 about $60.00<br /><br />I usually use #19271 1 valve seat kit $9.40 and #1395-6200 gasket set $2.40 <br /><br />All available from your local Merc dealer.<br /><br />DHP

 

[chadchurchill]

Re: correct kits

Thanks for the response. DHP, do you use the valve seat kit and gasket set instead of the carb kit or in addition to the carb kit?