Controls from a 115 to a 150 Will they fit ???

grady84

Recruit
Joined
Oct 30, 2006
Messages
5
I have a chance to pick up a pair of 150 Evinrudes. I currently have a 115 on an 84 Grady Tournament. I would like to put a single 150 and keep the other for a spare !! Will the controls fit both motors? The 115 is an 84 and the 150's are mid 80's also. I'm going to look at them over the weekend. I'd like to hear that it would just "plug in" !! Thanks
 

freddyray21

Commander
Joined
Jun 10, 2006
Messages
2,460
Re: Controls from a 115 to a 150 Will they fit ???

I would imagine they would, but if you have a manual for both motors the wiring diagrams should tell you.
 

Walker

Captain
Joined
Jun 15, 2002
Messages
3,085
Re: Controls from a 115 to a 150 Will they fit ???

Should hook right up.
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: Controls from a 115 to a 150 Will they fit ???

disconnect the wiring harness plug on the 115, then compare the plug in the 150. they should be alike.
 

Dhadley

Supreme Mariner
Joined
Feb 4, 2001
Messages
16,978
Re: Controls from a 115 to a 150 Will they fit ???

They'll both have the red cannon plugs on the harness. A direct swap. Even the throttle and shift. No problem.
 

Dhadley

Supreme Mariner
Joined
Feb 4, 2001
Messages
16,978
Re: Controls from a 115 to a 150 Will they fit ???

Lol!! Had to edit the last post....it's amazing what happens when you leave the " f " out of "shift".
 

grady84

Recruit
Joined
Oct 30, 2006
Messages
5
Re: Controls from a 115 to a 150 Will they fit ???

Sorry for the late reply... Thanks !!! I did check them Sunday ( said I was out XMas shopping but went and checked on the boat). Took pics and yes... The red plugs are the same.
 
Top