Chrysler 55 how to start engine

[conqueror]

Hi, i have just picked up a Chrysler 55hp electric start with no pull cord how do i start it up without wiring it to my boat, i do have a test tank in the back yard as this is a heavy engine i would like to try and get it started before it goes on the boat. is there a way that it can be hot wired somehow, if so how and what wires do i need.

thanks

 

[eurolarva]

Re: Chrysler 55 how to start engine

I think for simplicity you are going to want to wire it to your boat. The ignition switch is designed to meet all the criteria your motor needs to start and stop. If you watch ebay you will find wiring harness for cheap and possibly an ignition switch. Also find a library around you and see if you can either get a clymer or seloc service manual. Once you have determined the type of ignition you have you might be able to accomplish what you are attempting. Chrysler made like 4 different ignitions for the 55 and each will have a different wiring configuration.

 

[conqueror]

Re: Chrysler 55 how to start engine

Thanks Eurolarva,
On the engine it has 7 wires and on my boat it has 5 wires i have worked out which wires are not needed. i don't want to put the engine on the boat then find out that it does not work. Could i start it in the test tank if how do i wire it up so i can start it.