Carb cross reference

[234rick]

1989, 25hp, te25elceb. Evinrude has a 0432704 carb listed but mine has a 0432699. I can't find this carb, it looks like the exploded view but it has a hex head bolt in the bottom orfice. I need a carb kit but I want to make sure its the right one. Is there some way to find it? This is a motor I bought used.

 

[Daviet]

Re: Carb cross reference

I think the carb kit you need is PN 396701. The hex head screw is a plug for the high speed jet.
I am sure someone will come along with some knowledge on this carb and help out.

 

[bob1340]

Re: Carb cross reference

1989, 25hp, te25elceb. Evinrude has a 0432704 carb listed but mine has a 0432699. I can't find this carb, it looks like the exploded view but it has a hex head bolt in the bottom orfice. I need a carb kit but I want to make sure its the right one. Is there some way to find it? This is a motor I bought used.

The original carb kit was a 0398729 but was replaced by OMC0396701. This should fit all 3 carbs that went on that motor.

Looks like they used these 3 carbs:
20EC - 20ELC part# 0433193
25EC - 25ELC part# 0432704 replaced by OMC0439388
30EC - 30ELC part# 0432705 replaced by OMC0439389

I could not find the 0432699 part number.

The Hex plug was used on the 20 and 30 versions so you must have the 25EC-25ELC carb which would be a 0439388.

 

[tashasdaddy]

Re: Carb cross reference

looking at the carb diagram for your motor at http://shop2.evinrude.com/Index.aspx?s1=36937c3fbd985034531e43ce07e25da8&catalog_id=0&siteid=1


your carb kit, would be 0398729 CARBURETOR REPAIR KIT

hex bolt is carbb drain.

 

[bob1340]

Re: Carb cross reference

looking at the carb diagram for your motor at http://shop2.evinrude.com/Index.aspx?s1=36937c3fbd985034531e43ce07e25da8&catalog_id=0&siteid=1


your carb kit, would be 0398729 CARBURETOR REPAIR KIT

hex bolt is carbb drain.

Correct, but that number is superseded by 0396701.

 

[bob1340]

Re: Carb cross reference

1989, 25hp, te25elceb. Evinrude has a 0432704 carb listed but mine has a 0432699. I can't find this carb,

Where are you getting the 0432699 number from? I can't find that anywhere for anything Evinrude had.

 

[tashasdaddy]

Re: Carb cross reference

probably casting # on the body of the carb. thanks for updating number.

 

[234rick]

Re: Carb cross reference

Where are you getting the 0432699 number from? I can't find that anywhere for anything Evinrude had.

The # is on a tag on the carb. There is a casting # on the carb & it is D1 322299. I have searched evinrude & I didn't have any luck finding the carb ? That plug-screw on the front of the carb is a hex head with a screwdriver slot in it ? Not a nipple.

 

[234rick]

Re: Carb cross reference

Where are you getting the 0432699 number from? I can't find that anywhere for anything Evinrude had.

Also on the metal tag with the 43 2699 # below it is 31 H N. There are spaces like I have .

 

[234rick]

Re: Carb cross reference

I found another # on the very top of the carb 432700 but its a stamped # not cast. My factory manual ( in the carb servicing section ) shows a carb with the hex bolt like mine but the exploded parts view shows the nipple ?????????

 

[bob1340]

Re: Carb cross reference

I found another # on the very top of the carb 432700 but its a stamped # not cast. My factory manual ( in the carb servicing section ) shows a carb with the hex bolt like mine but the exploded parts view shows the nipple ?????????

You may want to just order the 0396701 kit and I wager it works. It seems some of the carbs on those motors had solenoids on them. Why, I have no idea. But that kit fits all the carbs for that motor. If it not correct you can send the kit back.

 

[234rick]

Re: Carb cross reference

You may want to just order the 0396701 kit and I wager it works. It seems some of the carbs on those motors had solenoids on them. Why, I have no idea. But that kit fits all the carbs for that motor. If it not correct you can send the kit back.

I found some 1996 25hps that have a carb # 432698 & the kit for them is also 396701 so that is the one i'll try. I was mostly worried about the jet needles being the right size. I take it you can't change the jets themselves or at least not the idle jet ? Thanks to all who offered advice it is much appreciated. Rick

 

[bob1340]

Re: Carb cross reference

I found some 1996 25hps that have a carb # 432698 & the kit for them is also 396701 so that is the one i'll try. I was mostly worried about the jet needles being the right size. I take it you can't change the jets themselves or at least not the idle jet ? Thanks to all who offered advice it is much appreciated. Rick

Correct. I have a '71 18 HP and it uses the same kit. They are made for multiple motors. They do not come with needles. You get the gaskets, the float valve and seat, and various small stuff. Getting the float is an option. If the idle needle is worn it needs to be ordered separately. No jets come with the kit.

 

[234rick]

Re: Carb cross reference

Correct. I have a '71 18 HP and it uses the same kit. They are made for multiple motors. They do not come with needles. You get the gaskets, the float valve and seat, and various small stuff. Getting the float is an option. If the idle needle is worn it needs to be ordered separately. No jets come with the kit.

Ok, well if that is the only parts you get in a kit I'll just take it apart & try clean it good first.