Carb adjustment tool?

[Lodgepole]

I have 2 Sea Doo SPX. The rear carb is almost impossible to adjust in the water and on the trailer. Standing on your head using a mirror. On the trailer eliminates adjusting the high speed jets. Does anyone know of a flexible drive tool that can be used to adjust both high and low speed jets while under way on a smooth day?

 

[Rob454]

Re: Carb adjustment tool?

I woudl jsut swap the stock needles for needles with a T on the end. You can get specific carb adjusting tool. I have two of them and i rarely use them I find either my fingers or a long thin shaft screwdriver will do the trick
Rob

 

[Lodgepole]

Re: Carb adjustment tool?

My low speed jets have T needles but it's hard to get your hand on either one while riding with the seat off reaching over, under, around, behind the spark arrestor between the carbs with a mirror to reach the needle on the rear one which is between the 2 carbs. Same for the high speed jets except no T needle and no way to turn it between the 2 carbs. Carbs should be left and right with jets for each on front or back of carb grouping.

Where can get the adjusting tool?

 

[Rob454]

Re: Carb adjustment tool?

Usually any motorcycle parts store or dealer can order it. Be ready to spend anywhere from 40-75$ on one. I woudl look on ebay or online first

Rob

 

[Jeff Walkowiak]

Re: Carb adjustment tool?

high speed is supposed to be closed usually on a sea doo,, low speed tool can be made quite simply