Can I use a Johnson/Evinrude tank on Merc outboard?

brandhr

Seaman Apprentice
Joined
Apr 19, 2009
Messages
37
Tried to search to see if this question has already been answered but no luck. I have a 1967 or ‘68 six HP Mercury. I have a newer fuel tank that was used with an Evinrude. If I swap out the connector can I use the tank with my Merc? Or does the Merc outboard require a Merc connector where the fuel line connects to the tank?
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,818
just use the mercury connecter to plug into the motor.---The small one I think.
 

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,903
If its a newer plastic EPA tank it will need a vent fuel cap to work. If its a old metal one it will work fine
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
13,446
Expect to see the Motor run smoother and more Torquey at low speed, but lose some top speed😉
 

Texasmark

Supreme Mariner
Joined
Dec 20, 2005
Messages
14,666
Expect to see the Motor run smoother and more Torquey at low speed, but lose some top speed😉
Interesting comment, just pun or factual. If factual, what's the mechanism......I know its jest since OMC was big block torque and low RPMs vs Merc. 1 HP/cuin and 6k WOT.......and NOISY...had both over the years.....but my 2002 115 is very quiet.
 
Top