Can’t find a part

[moistbutt]

I have a 1991 2-stroke Mercury 135 Black Max that i broke a carb part on whiles cleaning them (oops). I believe the part i’m looking for to be an emulsion tube, but considering my lack of general knowledge, that could be completely wrong. My main issue is that going to the mercury website and looking through the part catalogue, what i’m looking for is absent on the diagram. Maybe I’m just missing it, but either way I’m lost. Additionally, the carb repair kit doesn’t seem to come with what I need. I’ll attach pictures. Serial # for the motor is 0D021413. Any help or guidance on where I should be looking or where I’m going wrong is greatly appreciated! Thank you

 

[racerone]

Your location ?

 

[moistbutt]

Texas

 

[racerone]

Google the part # and see if and where it is available.

 

[moistbutt]

I don’t have a part number for it, is there a way to find it?

 

[racerone]

??-----810764

 

[racerone]

It appears there are 2 of these in the Sierra repair kit.---Along with every bit you would need.---A mere $126.25 ----I could post the part # for you but you will not learn anything that way -----Sorry

 

[moistbutt]

??-----810764

I don't think that part is the one I'm looking for, it's not the main emulsion tube, it's much smaller than the one that comes in the kit, which is why I'm not sure if it is an emulsion tube. In the picture of the carb hopefully you can see where one sticks out and the other is broken off.

 

[racerone]

OK----Run to your local machinist.----Have the broken part removed and a new part made / installed.-----What kit # did you look at ?

 

[Chris1956]

Does the crowleymarine web site show the part? They are pretty accurate.

 

[moistbutt]

Does the crowleymarine web site show the part? They are pretty accurate.

CrowleyMarine shows the same diagram as the mercury catalog, it's missing that part too.

 

[Faztbullet]

What the WMH number on carb?

 

[moistbutt]

I think WMH 1A, but that doesn’t seem right, I’ll attach a picture I might be reading it wrong

 

[Faztbullet]

Ya still needing one???

 

[GA_Boater]

I think WMH 1A, but that doesn’t seem right, I’ll attach a picture I might be reading it wrong

Ya still needing one???

PMs guys.

 

[moistbutt]

OK----Run to your local machinist.----Have the broken part removed and a new part made / installed.-----What kit # did you look at ?

the kit # is 8116912, and I’ll have to start calling shops around me to see if any are willing lol