buehler turbocraft plumbing?

[roland8or9]

dose anyone have a picture or a schematic of the routing for the cooling system for a 225 slant six in a turbocraft, or any marine application would help. I have a basket case 1968 buehler turbocraft and the plumbing is my big hang up. any help is a big thanks in advance. your new iboat member, Roland.

 

[Bondo]

Re: buehler turbocraft plumbing?

dose anyone have a picture or a schematic of the routing for the cooling system for a 225 slant six in a turbocraft, or any marine application would help. I have a basket case 1968 buehler turbocraft and the plumbing is my big hang up. any help is a big thanks in advance. your new iboat member, Roland.

Ayuh,.... Welcome Aboard Roland,... That's a tall order,...

Post up some pictures of what yer workin' with,...

Where about's in Maine,.... I'm a Maineiac in exile,....

 

[roland8or9]

Re: buehler turbocraft plumbing?

Ayuh,.... Welcome Aboard Roland,... That's a tall order,...

Post up some pictures of what yer workin' with,...

Where about's in Maine,.... I'm a Maineiac in exile,....

I will post pics as soon as I can download them from my sisters phone. Having trouble with that too. I live in a sleepy little town called Bowdoin. Life in the slow lane, Ayuh.

 

[Bondo]

Re: buehler turbocraft plumbing?

I will post pics as soon as I can download them from my sisters phone. Having trouble with that too. I live in a sleepy little town called Bowdoin. Life in the slow lane, Ayuh.

Ayuh,... This should help with That,...

I'm from up Old Town way,.... Milford to be exact, corner of rte. 2, 'n County rd,...
Still got the ole family Lodge on Chemo pond,... east-side,...

 

[roland8or9]

Re: buehler turbocraft plumbing?

Ayuh,... This should help with That,...

I'm from up Old Town way,.... Milford to be exact, corner of rte. 2, 'n County rd,...
Still got the ole family Lodge on Chemo pond,... east-side,...

Here are some pics of what I have. you will notice the thermostat housing is pointed down. it wont bolt up the other way. it hits the exhaust. hope this helps you to help me. thanks

 

[Bondo]

Re: buehler turbocraft plumbing?

Ayuh,.... Is this hooked to a Hamilton jetpump,..??

The ole '59 Bueler I had with a 312 Ford was,...
With the circulatin' pump on the motor blocked off, I'm guessin' it Is,...

I know the in-comin' water comes from a port on the pump, up to the front of the motor,...
I'll have a look 'round,...
I might still have a book on it, but I don't remember the slant-6 in it,...

 

[roland8or9]

Re: buehler turbocraft plumbing?

It is a Hamilton drive. Modle 75-SD, 2 stage. Wish it was a three stage. Maybe the slant six at 145 hp aint up to a 3 stage. oh well. My pump is blocked off also. whats in the pic is a plate instead of your ordinary water pump. the plate dose have an inlet or outlet, female, threaded hole. its below the thermo housing. Let me know what you come up with. In the mean time ill keep looking and asking. There is an old boat yard near by in Gardner. going to bend an ear or two there tomorrow.