bolt size for lower unit on bf115?

[horseshoeking]

my boat is down at the lake and I have a new impeller on the way. What size wrench do I need to take with me?<br /><br />Thank s

 

[outboardguy]

Re: bolt size for lower unit on bf115?

14mm combo wrench(four bolts) and 14mm socket/ratchet w/small extension bolt above prop next to trim tab.

 

[horseshoeking]

Re: bolt size for lower unit on bf115?

outboardguy,<br />I was down at the lake this weekend and the impeller replacement went without a hitch. Thank you for your help. It took about 45 minutes and we went for a one hour test cruise. No problems. Thanks again.

 

[outboardguy]

Re: bolt size for lower unit on bf115?

Glad I could help. Thank you for responding!

 

[cp]

Re: bolt size for lower unit on bf115?

Good to see that your BF115 is running well. What did you find was the cause of it stopping all of a sudden as you posted previously?

 

[horseshoeking]

Re: bolt size for lower unit on bf115?

Well, I thought it was the fuel filter stopped up, so I replaced it. Then I checked and cleaned the kill switch. Then I checked and cleaned all of the batteries and cables. Then I was reading the owners manual and came across the overheating light and possible cause. When I opened the impeller housing the old impeller was in two pieces. I live about 150 miles from the nearest Honda repair facility so I did it myself and saved some money. <br />Thanks again for everyones help on this.<br />