Battery switch question

Gradywhite3535

Chief Petty Officer
Joined
Dec 29, 2012
Messages
480
I re wired my wiring and I followed the diagram below. When I went to turn on my lights etc they didn't come on:(. Is my battery switch correct or should the positive wire from fuse block be on the small terminals on battery switch? Thanks
 

Attachments

  • image.jpg
    image.jpg
    140.9 KB · Views: 0
  • image.jpg
    image.jpg
    93.5 KB · Views: 0
Last edited:

bruceb58

Supreme Mariner
Joined
Mar 5, 2006
Messages
30,545
Re: Battery switch question

No, they shouldn't be on the small lugs.

Is the cable with the black shrink wrap on the common terminal?

For a simple test, put the switch to "both" and see if it works. When on "both" all three terminals are tied together.

You have lock washers behind those nuts? Hard to tell.
 
Last edited:

Gradywhite3535

Chief Petty Officer
Joined
Dec 29, 2012
Messages
480
Re: Battery switch question

Not sure about the washers. I'm pretty sure the wires from fuse panel and engine or on com. Will check tomorrow. I didn't put the fuses in the fuse panel yet. Would that cause it not to turn lol.thanks for the quick response.
 
Last edited:
Top