Alpha 1 drive wont trim up !

[goldens984]

Need some suggestions . My Alpha 1 drive will trim down but wont trim up . Need to get the boat off the street . I suspect the trim sensor.. the wire is frayed and bare . Any way of jumping the wire to get the trim up ?
Thanks for your suggestions .

 

[Bondo]

Re: Alpha 1 drive wont trim up !

Any way of jumping the wire to get the trim up ?

Ayuh,... You should be able to by-pass it inside the transom, at the bullet connectors,...
Follow the wires...

 

[xltier]

Re: Alpha 1 drive wont trim up !

Need some suggestions . My Alpha 1 drive will trim down but wont trim up . Need to get the boat off the street . I suspect the trim sensor.. the wire is frayed and bare . Any way of jumping the wire to get the trim up ?
Thanks for your suggestions .

did u try the trailer switch

 

[goldens984]

Re: Alpha 1 drive wont trim up !

Please excuse my ignorance were would I find that ?

 

[Bt Doctur]

Re: Alpha 1 drive wont trim up !

Most are located on the control handel.page 6A-9 this link
http://www.boatfix.com/merc/Techbk/94/94hsa6.pdf

 

[goldens984]

Re: Alpha 1 drive wont trim up !

Bt Doctur ...

Thank You So MUCH ! Made a small jumper cable got the drive to come up .
You saved my weekend !!!! Will be getting those sender switches replaced soon !