jasper60103
Commander
- Joined
- Sep 18, 2008
- Messages
- 2,055
I just got done lubricating my outboard and I almost had a bad experience.
My grease gun nozzle got stuck on the grease nipple.
Anyway, I pulled and pulled without success. Then I started unscrewing the nozzle from the gun and that's when it released. So the moral of the story is not to pull, but gently turn the nozzle left or right until nozzle works free. Hope this helps someone.
My grease gun nozzle got stuck on the grease nipple.
Anyway, I pulled and pulled without success. Then I started unscrewing the nozzle from the gun and that's when it released. So the moral of the story is not to pull, but gently turn the nozzle left or right until nozzle works free. Hope this helps someone.