96 Yamaha wave venture

Status
Not open for further replies.

Fred1739

Recruit
Joined
Nov 6, 2019
Messages
2
Trying to locate the flush port on a 96 Yamaha wave venture have the kit but don't know where to hook it up. 1st time owning one.
 

Attachments

  • photo322469.jpg
    photo322469.jpg
    924.4 KB · Views: 0

QBhoy

Fleet Admiral
Joined
Mar 10, 2016
Messages
8,342
Remember and start it before turning water on. Turn water off before stopping too. All the best
 

dazk14

Ensign
Joined
Jul 22, 2008
Messages
966
Remember and start it before turning water on. Turn water off before stopping too. All the best

What QBoy wrote should be in BOLD! I suggest adding a cheap lever garden hose shut off valve to your new fitting. That way, if it stalls, your not running like a lunatic to turn off the water.lol
You can run those easily for ~20 seconds without water.... We've had wayyy too many customers bring skis in that were full of water.
Also, replace the cap on the flush port. Yamaha makes very reliable ski's and the venture was a good one.
Good luck!
 
Status
Not open for further replies.
Top