If it's an old NS90A, when were the carbs and whole fuel system serviced? What oil are you running? What is the plug condition? Is link and sync set correctly? Have you verified the primer hose and tank pickup don't have any vacuum leaks? Are you getting any warning lights or beeper?
yes it is an older nissan and the oil inj. has been removed im using mercury oil plugs are new and linkage is set correctely im a certified suzuki mech. this one has me stumped thanks for your help just dont know much about the nissan
yes it is an older nissan and the oil inj. has been removed im using mercury oil plugs are new and linkage is set correctely im a certified suzuki mech. this one has me stumped thanks for your help just dont know much about the nissan
Greg,
Welcome to the board and good luck.
I sure hope this board helps you get your problem solved because we can sure use a good Suzuki mind over on that side of the board.
Hope you'll stick around.
I would start by using 003-21036-1 SERVICE MANUAL, 3 & 4 CYL, 2-STROKE $45.00 as a guide (available from any dealer -- even a few forum members, even me...) and do a thorough ignition system test.
