Hey Guys hopefully you can help (again)LOL..My motor seems to be running on one cyclinder sometimes. Heres what I have done. I placed a spark tester on the plugs and it is getting spark while running, Then I would remove the plug wire from one cyclinder and it would stay running, then remove try it for the other and it would stall(like a dead cyclinder).But it would not do this all the time,I dont think it is the coil because there is spark consistenly. I pulled a plug from the cyclinder in question and it seems as if there is some water in there. Could it be water is leaking into the head and fouling the combustion?
The gasket has no signs of leakage and compression is 95lbs on one cylinder
and about 92 on the other. Is there any other way for water to reach the cylinders. Thanks for any help
The gasket has no signs of leakage and compression is 95lbs on one cylinder
and about 92 on the other. Is there any other way for water to reach the cylinders. Thanks for any help