71 115 evinrude leaking gas top carb

Pete4351

Recruit
Thread starter
Joined
Aug 18, 2016
Messages
4
I have a 71 Evinrude leaking gas out of top carb peep hole at top dead center of carburetor oh hi everyone
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,699
Dirt in the inlet needle/seat, loose seat, stuck float, heavy float, misadjusted float are the usual causes of that. Your engine is old and the Alcohol polluted gas these days can cause the fuel line and gaskets to decompose.
 

James R

Commander
Joined
Feb 1, 2007
Messages
2,681
If you haven't done a carb rebuild recently then do that and replace the fuel hoses at the same time. The newer hose is more resistant to alcohol. Always use Stabil Marine in your fuel. This will help save you the usual carb and hose problems. Remember, a poorly functioning carb could mean a blown motor coming soon.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
wow. From alcohol pollution to a blown motor!

Sounds like a carb rebuild would be in order. Disassemble and clean out all openings. Might as well do both carbs. If new to you, oem kits may have some instructions, at least parts descriptions. But get clear about what you have first -- don't think there was a 115 in '71 (and your carb sounds more like a 125, but not sure). Get a model number and verify, then get kits.
 

Pete4351

Recruit
Thread starter
Joined
Aug 18, 2016
Messages
4
Thanks for quick reply iv rebuilt the carbs oem parts one leaked Hi speed tube then I a just float now leaking through the hole at top center of carb?
 
Top