5.7gpi obd1 port

[flaboy1979]

my boat is not running right and want scan the codes on it my qeutsion is what does the port look like is it the same one as a 82 to 92 gm ayto zone has a actron scanner for that model gm will that scanner work thank you
http://www.autozone.com/autozone/ac...er&fromString=search&itemIdentifier=5390_0_0_

 

[Don S]

Re: 5.7gpi obd1 port

What is a 5.7gpi ? Never heard of that model. A Mercruiser serial number would work better.

 

[flaboy1979]

Re: 5.7gpi obd1 port

i dont know where i came up with gpi i ment gsi found a tag on motor 5.7gsi pefs 4012019798 3869059 transon assembly tsk skm 411164558 386884 drive unit skm-m 1.51 4202006155 3868890 and the tag one the lower unit drive 3868164 dp-s 1.95 serial #4112034317.another other info about these numbers would be helpful thank you don you are allways helpful thank you

 

[Don S]

Re: 5.7gpi obd1 port

Well, for one thing, you posted in the Mercruiser forum, so I will kick this over to the Volvo Penta forum for you.

 

[Don S]

Re: 5.7gpi obd1 port

I don't know if Volvo used the same setup as automotive. But I can tell you that there is a very good chance that your problem may not even set a code. I seldom found the problem that actually set a code on those older setups.
If you just want to check for codes, and put in base timeing mode, try the Codemate http://www.rinda.com/marine/marine.htm#merctool, but the scan tool just above it will tell you EVERYthing.

What sort of problems are you having.

 

[Bondo]

Re: 5.7gpi obd1 port

my boat is not running right and want scan the codes on it my qeutsion is what does the port look like is it the same one as a 82 to 92 gm ayto zone has a actron scanner for that model gm will that scanner work thank you
http://www.autozone.com/autozone/ac...er&fromString=search&itemIdentifier=5390_0_0_

Ayuh,..... How is it not runnin' right,..??

 

[flaboy1979]

Re: 5.7gpi obd1 port

The motor seems to load up when quick on the throttle aand idles a little ruff and dont seem to have as much power as i would have expected,have not it it running rite since i got the boat a month or so ago have changed the plugs and done a tune up it with no change