I have a 455 olds with an American turbine jet. I have redone the valves, cleaned the heads, replaced all gaskets, replaced fuel lines, fuel pump, and checked the engine for cracks and there are none. With that said, when I take the boat out, after about a half an hour the boat begins to bog down and stall. I have to sit for about 5 minutes before I can start it again and go.
If I keep it at a very low speed, it will go then stall again in a not 10 minutes of use. If I accelerate to half it will bog down and stall immediately. I have put 2k in the engine already! I don't think it's running hot, the water temp is running 120 to 140, if the temp gauge works? Any ideas on what it may be? Thanks for your help! I really want to get on the water again
If I keep it at a very low speed, it will go then stall again in a not 10 minutes of use. If I accelerate to half it will bog down and stall immediately. I have put 2k in the engine already! I don't think it's running hot, the water temp is running 120 to 140, if the temp gauge works? Any ideas on what it may be? Thanks for your help! I really want to get on the water again