JohnnyBuoy
Recruit
- Joined
- May 23, 2010
- Messages
- 3
I have 1995 2600 Pursuit, with an inboard 454 Crusader freshwater-cooled engine. I have tried everything and it continues to over heat. This is what I have done.
1. Cleaned heat exchanger, extensively
2. Replaced raw water impeller and pump
3. Replaced risers
4. Replace thermostat
5. Pulled freshwater pump and checked extensively
6. Checked clam shell on thru-hul
7. Ran with thermostat AND without thermostat
8. Flushed oil cooler
After doing all of this it continues to overheat. PLEASE LOOKING FOR SUGGESTIONS!!!!
1. Cleaned heat exchanger, extensively
2. Replaced raw water impeller and pump
3. Replaced risers
4. Replace thermostat
5. Pulled freshwater pump and checked extensively
6. Checked clam shell on thru-hul
7. Ran with thermostat AND without thermostat
8. Flushed oil cooler
After doing all of this it continues to overheat. PLEASE LOOKING FOR SUGGESTIONS!!!!