350 Chevy

[corzy]

Hi everyone, we have just reciently got on the market for a engine to fit in our 1985 sea ray sundancer. What were looking for is either a rebuilt engine ready to drop in or even a used motor not being used anymore (trashed boat) as long as it ran good before.
a 350 small block chevy is the engine, if you know anyone or another forum where i could post this, any info would be much appreciated.
im located in sarnia ontario, right over the bridge from port huron.
thank you
Nick

 

[nlain]

Re: 350 Chevy

I take it that your prior post of water in the oil turned out real bad.

Check the link below, this is right here in iboats, the link is for longblocks. I performed search on 86, 5.7 merc, 260 hp, Ontario shipping.


http://www.boatmotors.com/motorpart...&manufacturer=2&disp2=5.7&cyl=8&submit=Search

 

[corzy]

Re: 350 Chevy

thanks a ton, ya the machinist said it looks like a head gasket blown, but there wasn't water on top of the heads, so there doing a block pressure test and if it passes than i guess it was the head gasket.....but in the mean while yep looking for a new motor.