3.7l breezeworks alt conversion with ps question

[scameron7]

Hi there I have an 88 seamaster with a 3.7l with ps and I want to put a breezeworks alt kit on, I know that it is a low mount kit that I need, so I was wondering if someone that has this kit would be able to tell me what the aprox measurement would be from the edge of the crank pulley to the center shaft of the alt, I am not sure if It is going to clear my floor or If I will be able to cut the floor to fit it.

 

[stonyloam]

Re: 3.7l breezeworks alt conversion with ps question

Don't have the measurements, but this is what mine looks like.

 

[wrestling coach]

Re: 3.7l breezeworks alt conversion with ps question

Here is a little different angle of mine. I know it does not have power steering as yours does but a reference just the same. I do not have access to the boat right now or I would measure it for you.

Dennis

 

[scameron7]

Re: 3.7l breezeworks alt conversion with ps question

Thanks for the pics guys, I should be able to get a good idea from them. Looks like a great set up, I know the quicksilver setup won't work not enough room at the front crank pulley my engine sits low.

 

[Kubica]

Re: 3.7l breezeworks alt conversion with ps question

Hi there I have an 88 seamaster with a 3.7l with ps and I want to put a breezeworks alt kit on, I know that it is a low mount kit that I need, so I was wondering if someone that has this kit would be able to tell me what the aprox measurement would be from the edge of the crank pulley to the center shaft of the alt, I am not sure if It is going to clear my floor or If I will be able to cut the floor to fit it.

Hi,

Where are you seeing the breezeworks alt kit for sale?

 

[a1nowell]

Re: 3.7l breezeworks alt conversion with ps question

Breezeworks

 

[scameron7]

Re: 3.7l breezeworks alt conversion with ps question

I put the ps. Alt kit from breezeworks on my boat and it fit great,just like it was original equipment and it was easy dealing with them.