25hp-2000 Johnson carburetor

Donja

Recruit
Thread starter
Joined
Jan 28, 2016
Messages
1
Hi,
I wanted to get a little more power from my 2000model 25hp Johnson. Can i swap the carby from a 30 or 35 hp 2000 model and put it in my 25? would i need to modify anything else?
I have noticed some other manufacturers have the same engine for 20-35hp's and the carby can be changed.
I have been trying to research it and have not really found any answers. any help would be appreciated.
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
Well Donja, first things first. :welcome: to iboats. Great to have you join us...

Okay, my uneducated gut opinion is NO! So many folks want more HP and think a mere carb change can offer that. But usually it take much more then just the carb. However, without knowing your particular engine, That is just my opinion. Usually timing and manifolds and so many other internal engine issues need changed as well to offer more power. JMHO!
 

AlTn

Commander
Joined
Mar 9, 2010
Messages
2,813
just a casual glance at a parts list and diagram for a 2000 model 25 hp. two stroke...carbs for both the 25 and 30 are listed under each parts list, with no other different parts listed for the 25 or 30 < intake, exhaust, block, or pistons > sooooo, I take it that you can just swap the carbs from the 25 hp. and 30 hp., other mods necessary?...like linkages, etc.?...I dunno...find your model no. and do a search...several sites have these diagrams...I have no direct experience with this swap
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
Apparently the carbs are different with different part numbers, but so is the crankcase. Seem the 25HP model is still available, but they list the 30HP model as obsolete with different part numbers. So Again, I don't know. :noidea:
 
Top