2015 4.3L mercruiser stalling issue

[doug1212]

I have a 2015 Mercruiser 4.3L MPI with an Alpha I gen 2 outdrive
I have an issue with the boat stalling when going from drive to neutral.
I have checked the shift cable adjustments and confirmed they are properly adjusted.
not sure if there is an adjustment or procedure to adjust the shift interrupter switch ?
Not sure if my idle is too low when shifting (650 RPM ).
Any advice on this would be greatly appreciated.
Thanks in advance
Doug Larsen

 

[Bt Doctur]

watch the interupter as you shift out of gear . If it hangs instead of springing back you need a new shift cable

 

[doug1212]

Thank you i will check into that , does it matter if it is running when you check ?
The boat is currently in the water for the season.

 

[Bt Doctur]

the switch will only activate IN THE WATER coming out of gear. Any other time is a bad shift cable or corrosion