2006 Four Winns 244 Funship Windshield

[payfields]

Well from the searches i've done it doesn't sound good.
Basically starboard side glass is gone and metal is pretty bent, probably beyond repair but what do i know.

Found part number and matched it to four winn's website. Its a taylor made item.
From what i read it seems they obviously wont have something this old in stock, and to get taylormade to make it would be 5k+???? It's one of the curved glass ones with a walkthrough section.

Are there any other options here? How about getting a custom made one from scratch based off the other side and the bent frame? Is that possible?

Been looking and emailed most salvage yards that i could find and also sent taylor made an email.
Fourwinns just sends my "request for quote" to some dealer south of me near tampa. (Im in Jacksonville, FL)

Any other options here or advice besides crawling into a ball and praying?

 

[Fun Times]

Re: 2006 Four Winns 244 Funship Windshield

Found part number and matched it to four winn's website. Its a taylor made item.
From what i read it seems they obviously wont have something this old in stock?

Hi there, looks like your looking for four winns part number 060-1914-02

http://parts.fwdealer.com/Catalog/Category?SelectedCategory=244FS-A06-Z00#!prettyPhoto

Have you tried calling Four winns and asked for parts to get some advice of how to find something that may match up to your boat model? It may be worth a try at the very least.

Good luck.

 

[Slip Away]

Re: 2006 Four Winns 244 Funship Windshield

Four Winns will do nothing. They will just refer him to the manufacturer, as they already have done.

 

[crabby captain john]

Re: 2006 Four Winns 244 Funship Windshield

Least expensive option is probably to have a glass shop make a complete new windshield. They will eliminate the 'bend' to make both sides the same. They will need the boat for measurements and the install.