duckbuster
Recruit
- Joined
- May 30, 2007
- Messages
- 2
I have a 2004 Tahatsu MD50 TLDI which has served me well. I have take really good care of it, servicing it regularly as scheduled. The last week I have developed a major problem. The motor will not run properly at all. I will not accelerate past 2000-3000 rpm. It will not idle at all. Once in gear, it lunges. I have gotten it up to speed several times only to have it immediately shut down to a low rpm and begin lunging again.
I have changed to plugs, using the required expensive platinmun plugs, I have changed the fuel, I have run a fuel injection cleaner through the engine, I have check every fuse I can find, I have cleaned the fuel filter. I am now at a loss of what to do next.
Do you have any suggestions for me or do I need to throw in the towel and take it in for someone else to work on?
I have changed to plugs, using the required expensive platinmun plugs, I have changed the fuel, I have run a fuel injection cleaner through the engine, I have check every fuse I can find, I have cleaned the fuel filter. I am now at a loss of what to do next.
Do you have any suggestions for me or do I need to throw in the towel and take it in for someone else to work on?