luvmydancer
Recruit
- Joined
- Aug 5, 2012
- Messages
- 2
well let me start off by saying i really like this boat have owned it for a little under a month and shes beautiful. i bought her through a brokerage and had her surveyed and things came out very well small list of minor things. 2002 sea ray sundancer 300 twin 5.0l mpi bravos with bravo three drives. port side motor was replaced with mercruiser longblock.first two weeks fixed and cleaned all the minor things. used her twice about a week ago just after engines were started and about to get underway i started hearing 2 beep sounder every minute. i checked batteries and found 1 no good so i changed all of them.(used interstates) then the port side volt gauge was in opp after few houirs of researching and tinkering found out gauge is no longer available so i repaired it myself and checked and tested and found working properly. found port alternator down only charging at 10 volts so i replaced it. both motors have new plugs, filters,oil,manifolds risers,cleaned throttles and iac's new gear position sernsors. to my suprise i still have this beeping noise. i have checked all fluids and found them good. i just dont have software to hook up to these engine. what can i do to diag myself and correct problems? please help beeping driving me crazy. pretty handy so i know i can tackle this myself.
