2002 200 HPDI Trim Indicator Issue

[Striper Mike]

I have an issue with my trim indicator. When motor is all the way down, trim indicator says I'm still about 75% up. Does anyone have a link to a manual stat shows how to adjust the trim indicator? Last I used the boat everything was fine. This past weekend out, all of a sudden the indicator is messed up. Never had this issue in the past. Any help will sure be appreciated. Trim motor is running...keeps running, but sounds like it is running out of oil. Engine goes up and down fine, just incorrect position indication.
Thanks

 

[Striper Mike]

Re: 2002 200 HPDI Trim Indicator Issue

Still looking for help on this. Please, anyone have suggestions?

 

[pine island fred]

Re: 2002 200 HPDI Trim Indicator Issue

Your wiper for the trim position transducer is broken. Old ones are plastic, replacements are metal. Is a matter of one bolt or screw, replacements have a small dowel that fits into the shaft so there is no rigging. Just be sure the new wiper is installed under the plastic arm attached to the transducer shaft. FRED