2000 Johnson 200 ran all day and now won't start

[Steve's proline]

Just got back from shop had the carbs rebuilt
started and ran great got home to flush engine and nothing
I turn the key the gauges react the tilt works just doesn't start no clicking noise nothing
Any help would be appreciated thanks

 

[Will Bark]

Re: 2000 Johnson 200 ran all day and now won't start

Look for a blown fuse under the cowl down by the starter solenoid; probably a 25 or 30 amp fuse. Good luck

 

[hidef]

Re: 2000 Johnson 200 ran all day and now won't start

If the main fuse is good it is the starter solenoid. Based on you description of have instrument power and trim/tilt I think you will find your issue there.

 

[daselbee]

Re: 2000 Johnson 200 ran all day and now won't start

Check the "start in gear lockout" switch in the control. Jostle the control back and forth while attempting start.
You might find a spot where the switch will work.

When you turn the key to start, there should be +12v on the yellow/red wire at a small terminal of the starter solenoid. The "start in gear lockout" switch prevents this voltage if the control is in gear.

If your fuse is blown, you will not have the gauge activity you describe.