1999 Sea Ray Wiring for Navigation lights at the switch

[dcorr70]

I did it, I made the mistake of removing my navigation light switch to repair it and when I installed it back in place I forgot to mark where and which wires go on the back of the switch. I have a 1999 Sea Ray 290 Sundacer. The switch has 7 leads and I have 6 wires to plug into the siwtch. Some terminals have 2 wires into it some are single wires.

 

[sasto]

Re: 1999 Sea Ray Wiring for Navigation lights at the switch

good luck!

 

[dcorr70]

Re: 1999 Sea Ray Wiring for Navigation lights at the switch

Does this switch have a bank o 3-1-3 or 2-3-2. Is it a lighted switch?

It is a lighted switch. Not sure on the bank

 

[dcorr70]

Re: 1999 Sea Ray Wiring for Navigation lights at the switch

I was able to pull up online the wiring diagram, so I'm heading back to the boat later today and that should help me.

 

[oconnor77000]

Re: 1999 Sea Ray Wiring for Navigation lights at the switch

I have a 1995 30ft Dancer.The blower switch went on me so I got a new 5 pole switch.After I replaced it now I have no power to any of the dash switches.I checked any fuses in area but they were all OK.Is there a main 12v switch or fuse? The ignition switches still work ??