1999 Johnson 6HP - J6REEA (oil mix?)

pbstack

Recruit
Thread starter
Joined
Jul 14, 2016
Messages
2
Trying to figure out oil to gas mixture....guy I just bought it from doesn't seem to think there was. He says he's 99% sure it's a 4 cycle motor that doesn't require oil/gas mix. It runs good but smokes something fierce all the time. I'm not a motor guy so I'm just trying to figure this thing out. I'm also guessing it's a 1999 based on the research I did for the model number.
Any help is appreciated! - Thanks in advance
 

Vic.S

Rear Admiral
Joined
May 4, 2004
Messages
4,721
Thats the number for a 1999 2 stroke which will run on a 50:1 fuel mix

If the PO though it was fourstroke and did not use a fuel/ oil mix I would think its cream crackered but perhaps he did not use it. I'd be very suspicious about buying a motor from someone who did not know if it was a 2 or 4 stroke ... stolen perhaps

AFAICS In 1999 the Evinrude 6hp were 4 strokes E6R4EEM but not the Johnsons according to the parts catalog.

A four stroke will have an oil sump for lubricating oil c/w a dipstick and oil filler cap, just like your car. Not to mention a belt driven camshaft
 
Last edited:

pbstack

Recruit
Thread starter
Joined
Jul 14, 2016
Messages
2
Thank you....I hear ya and agree. My father-in-law said there was definitely oil in the gas. I got about 3 gallons of previous (old) gas from the guy. It does smoke but hopefully that will subside once I get new gas in there (with 50:1 oil mix).

It does run very nice and smooth, gears shift no problem. Hopefully I'll treat it right and get some enjoyment this summer.
Thanks again!
 
Top