Postalscuba
Recruit
- Joined
- May 7, 2015
- Messages
- 3
1998 Yamaha 200 hp 2 stroke carb engine, model #S200TXRW. I have no spark on cys 2&5. I have swapped coils and the miss stayed with the cyls. I found that the yellow wire that breaks out of the harness at the cdi box didn't have 12v, took the harness apart and replaced a splice and wires. I now have 12v at the cdi plug but still no spark on 2&5. I've disconnected the tach, remote oil tank harness, and temp sensor -one at a time with no change. Ohmed out the crank sensor - it is within specs. Please help, I'm running out of ideas. Could this be in limp-home mode?