1998 evinrude 225 ocean pro, no spark! Help!

[Arty76]

What type/brand of stator did you get? I bought a new one for mine on ebay from Caltric, the two large yellow wires that come out of the back side that go to the rectifier came without a connector, just push on spade style connectors, does it matter which one goes on which side in connector from rectifier? I'm having no spark issues as well. 1995 200hp

 

[Crosbyman]

yellows carry AC power and reversing the wires does not matter

 

[Arty76]

yellows carry AC power and reversing the wires does not matter

Thank you! So if I check those yellow wires with my volt meter while cranking the engine, I should get voltage?

 

[Crosbyman]

Thank you! So if I check those yellow wires with my volt meter while cranking the engine, I should get voltage?

yes you should see AC volts on your VOM...some engine even have 3 yellows and use a 3 phase diode rectifier .

 

[Arty76]

yes you should see AC volts on your VOM...some engine even have 3 yellows and use a 3 phase diode rectifier .

Do I need a dva adapter to get a voltage reading? I was reading a little about one, but not sure if I actually need one??

 

[Crosbyman]

DVA is essentially a AC to DC converter to flatten out high peaks of AC the average out the DC equivalent voltage. you can buy a meter , a meter adapter module or build your own if you look them up on google. Doing just an AC reading will tell you if the stator is producing AC or just hook it up to the rectifier's AC inputs and if all is good your rectifier will charge the battery.

look on the battery posts for a voltage increase as RPMs go up.

 

[Arty76]

DVA is essentially a AC to DC converter to flatten out high peaks of AC the average out the DC equivalent voltage. you can buy a meter , a meter adapter module or build your own if you look them up on google. Doing just an AC reading will tell you if the stator is producing AC or just hook it up to the rectifier's AC inputs and if all is good your rectifier will charge the battery.

look on the battery posts for a voltage increase as RPMs go up.

So if I hook my meter leads( without an adapter) to the yellow stator wires and crank the engine, how much voltage should I see? Will I see a voltage increase at the battery posts at cranking speed, or when engine is running (which of course it's not right now because I have no spark)?

 

[Crosbyman]

I do not have specs maybe Racerone has them. I would not look to deep into this .....just try it and check for a rise in voltage on the battery (from resting to charging during higher rpms ).

In theory if the battery is to be charged at higher rpms it should rise " x" volts. the DC being rectified AC peaks .

I suspect you should at least see a voltage level say...30 volts AC on a DVA reading possibly 20 on pure AC on yellows on a regular VOM meter . VOM provide what is call RMS volts readings which does not reflect the full peak values a DVA adapter will provide since it job is to rectifythe full AC volt peaks and " pile them up" in a capacitor and to be represented in DC formaT/ values.

The engine AC rectifier/regulator's function will apply the necessary volts to the battery.

https://www.go2marine.com/Product-Guides/MFR/CDI/2-dva-explained.pdf

 

[Arty76]

I do not have specs maybe Racerone has them. I would not look to deep into this .....just try it and check for a rise in voltage on the battery (from resting to charging during higher rpms ).

In theory if the battery is to be charged at higher rpms it should rise " x" volts. the DC being rectified AC peaks .

I suspect you should at least see a voltage level say...30 volts AC on a DVA reading possibly 20 on pure AC on yellows on a regular VOM meter . VOM provide what is call RMS volts readings which does not reflect the full peak values a DVA adapter will provide since it job is to rectifythe full AC volt peaks and " pile them up" in a capacitor and to be represented in DC formaT/ values.

The engine AC rectifier/regulator's function will apply the necessary volts to the battery.

https://www.go2marine.com/Product-Guides/MFR/CDI/2-dva-explained.pdf

Thank you so much for the help and info, I appreciate you taking the time.

 

[dingbat]

So if I hook my meter leads( without an adapter) to the yellow stator wires and crank the engine, how much voltage should I see? Will I see a voltage increase at the battery posts at cranking speed, or when engine is running (which of course it's not right now because I have no spark)?

https://www.go2marine.com/Product-Guides/MFR/CDI/Johnson-evinrude-DVA.pdf

 

[racerone]

I do not believe the yellow wires from the stator have anything to do with spark.