My STBD engine recently began to idle poorly and shake more than the Port I have checked and or changed the following...
Compression test ( ALL WITHIN 10 PSI 110-120), Primary and secondary fuel filter, new primer bulb, 3 new LPFPs, new spark plugs ( all 6 spark checked ok pulling each wire one by one), cleaned VST (was not dirty), all 6 injectors checked out like new as per tech and report, cleaned O2 sensor( wasn't too dirty), shift microswitch appears to be working correctly (noy shorted out) , Is the black stain a symptom of rich or lean fuel mixture? I ordered a new NTK O2 sensor to try. Looking for the test harness for O2 sensor as well.Part Number?
Any other suggestions?
Compression test ( ALL WITHIN 10 PSI 110-120), Primary and secondary fuel filter, new primer bulb, 3 new LPFPs, new spark plugs ( all 6 spark checked ok pulling each wire one by one), cleaned VST (was not dirty), all 6 injectors checked out like new as per tech and report, cleaned O2 sensor( wasn't too dirty), shift microswitch appears to be working correctly (noy shorted out) , Is the black stain a symptom of rich or lean fuel mixture? I ordered a new NTK O2 sensor to try. Looking for the test harness for O2 sensor as well.Part Number?
Any other suggestions?