Can anyone give me an idea of what else to check ? Checked fuses and looked for loose conections. Have fuel and oil but no spark. Remove start switch/safety laynard panel fron the inside of the boat and check two posts on ignition switch both feed while key on. There are four slide on conectors on the safety laynard and three have feed while turning engine over but the one with two black wires going to it does not. I cannot tell you the voltage because i only used a test like to check these? Engine turns over strong but no spark ! Any ideas ? This boat only has 98 hours on it and ran fine one day and a couple of days later this. Thank you for any help !
Mike
Mike