1996 Mercury 125 ELPTO

[amoon32]

I am looking to replace the trim/tilt motor and reservior on my motor... I am having problems finding the part number to replace this.. any help would get great thanks...

right now i am looking at this:

http://www.amazon.com/exec/obidos/ASIN/B001VGCMF8/karekapt-20/

would this work?

I wanna work on thus asap thanks again and glad to join the forum

 

[jerryjerry05]

Re: 1996 Mercury 125 ELPTO

Welcome to iboats. Need serial# .It probably would work.To make sure we need the #.J
Profile?

 

[amoon32]

Re: 1996 Mercury 125 ELPTO

The serial number on the motor is OG420560 this is the only serial # I could find

 

[carholme]

Re: 1996 Mercury 125 ELPTO

amoon323;

Your s/n comes up as a model:

1125412SD MERCURY 1996 125

Parts listing:

http://www.crowleymarine.com/mercury-outboard/360.cfm

Service manual p/n: 90-830234R04

http://1manual.com/Mercury manuals/Service Manual PDFs/TwoStroke/830234r3/cover.pdf

If you scroll down to the lower part of the opening page, you will see the various engine components in red. Click on the one you want and when the first page opens, click on the "Save As" icon at the top LH corner of the page and you can save it to your computer.

Gerry

 

[amoon32]

Re: 1996 Mercury 125 ELPTO

Gerry,

Thank you for the help.. I am new to this and have one other questions for everyone. I am looking to replace just the trim motor not the entire kit. My trim motor went bad and that is all i have to replace can I just replace this motor by removing the 4 screws and putting a new one on. If so could you send me a link or view the link i posted to see if that motor will work. Thanks again for everyone's help.

 

[carholme]

Re: 1996 Mercury 125 ELPTO

amoon;

Here is the Arco application guide and from that you will see for the 125hp 4 cyl., that the 6276 two wire will work.

http://www.arcomarine.com/xhtml/Marine Cross Reference Into.html

Click on Mercury to see your engine.

Before purchasing, you may want to contact RRitt (member on this forum) for his appraisal.

Gerry

 

[amoon32]

Re: 1996 Mercury 125 ELPTO

Gerry

It looks like it will work thank u very much for your help and the information

 

[amoon32]

Re: 1996 Mercury 125 ELPTO

Gerry,


Just wanted to let you know that I received that item and it was placed onto the boat and everything works great. Thanks for the help. I do have another questions for anyone that could help. After running my motor for a short while or long while doesnt really matter when I turn off the motor and use my trolling motor for 15 min or so i takes awhile for my motor to start. seems like i have to pump the fuel ball to get it going again. Any help on this would be great. thanks..


Allan