1996 Johnson thinks it is forward when it is netrual

btdouglas

Recruit
Thread starter
Joined
Jul 5, 2003
Messages
1
I replaced my water-pump in my 1996 Johnson 90hp V4 this weekend. When I put it all back together and took it to the lake, I had this problem. <br /><br />I have always had to put my shift control in fast idle to start my boat - so I did that, it started great, but the prop is turning. And when I try to take it out of fast idle to shift into refeverse or forward the boat trys to go into to gear and push my truck back up the ramp. You can hear it trying to engage the lower unit when you start pushing the fast idle off. I did not force it into netrual - I just shut it down and now I am here. <br /><br />Any ideals? I tried to make sure that I put it back together the same way I took it apart - I did not have any parts, bolts or screws left over anyway. :)
 

ob

Admiral
Joined
Aug 16, 2002
Messages
6,992
Re: 1996 Johnson thinks it is forward when it is netrual

Remove the pin from the shift cable to shift arm and manually place the shift arm in the neutral position .You should be able to feel each position ,F,N,and R.Now note whether the pin hole is aligned in neutral and adjust the cable trunion until it is.Reinsert pin.Fine adjustment of the shift cable trunion may be necessary.<br /><br />Doesn't that engine have a "quickstart" feature that doesn't require fast idle lever?Are the controls binacle or side mount?
 
Top