Fernand Fluet
Recruit
- Joined
- Aug 19, 2006
- Messages
- 5
the engine dies and sometimes never starts again.When
playing with the 8 pins plugs near the engine, it will be ok
for a while. I cleaned the male pins,it went ok until I used my 3.0l engine, then the 9.9 never start again, I guess
splashing of water on that plug or wires going in the 9.9.
First: Is there a way to bypass the cables coming from the ****/throttle assy and use the manual start to make sure the mecanics is ok.At this moment the keys has to be in on position to be able to start manually.
Second:Can I find the pin out of that plug and the use of each pin. There is 7 pins going in circle and 1 in the middle.
playing with the 8 pins plugs near the engine, it will be ok
for a while. I cleaned the male pins,it went ok until I used my 3.0l engine, then the 9.9 never start again, I guess
splashing of water on that plug or wires going in the 9.9.
First: Is there a way to bypass the cables coming from the ****/throttle assy and use the manual start to make sure the mecanics is ok.At this moment the keys has to be in on position to be able to start manually.
Second:Can I find the pin out of that plug and the use of each pin. There is 7 pins going in circle and 1 in the middle.