I recently damaged the skag on my Force. The unit was removed and the repair was done very professionally. When I got it back it ran fine for about 5 hours. Then while pulling a tuber, I put it in forward and it did not go into gear. I tried a second time, nothing, so I tried reverse, that worked, I tried forward once again, nothing and finally I tried reverse again and nothing. I had the linkage adjusted and in the yard it was shifting fine, though we did not run it with muffs. When I launched it, reverse was great, but no forward gear. At no time was there any sound of grinding.<br /><br />Now even manually, I can not set forward and at times, if shifting from reverse back to neutral, reverse sticks.<br /><br />I have drained the unit and the lube is perfect, no indication of grinding. Any help you can provide would be great!<br /><br />I am sorry, I first listed this in the I/O section, hope this correction is not a problem.
<br /><br />