1995 125 2 stroke mercury won't start no spark

[massing05]

had it in to a repair shop and had a coil replaced, they told me 140psi all across when they did a compression test took it out on the weekend fired right up ran fine shut it off for a few hrs and started up fine again came home.

put it in the water today and I had no spark wondering what to check, turns over fine but wont even try to start. any help to begin trying to figure it out without going to a shop again would be appreciated.

 

[gm280]

massing05, :welcome: to iboats. Nice to have you aboard...

I know this seems obvious, but have you checked the kill switch first? If so and that isn't the problem, then you have to check to see where the spark is missing from. And since it is all cylinders (or I am guess it is all) then you should look at what is feeding those spark coils. And that could be the ignition plate as well. But it would seem that something that is common to all spark plugs... JMHO!

 

[massing05]

tried my best but electrical issues aren't my best so took it to a shop, told me I need a new stator. feel like they should have been able to tell me that when I had it in a week ago 1 time use. found it weird how it started fine every single time I have used it(new to me in june) and then just nothing not even a sputter or anything.