1994 Johnson 200hp Outboard - Unknown nut for adapter stud 031416

Hungry Crew

Recruit
Thread starter
Joined
Oct 28, 2017
Messages
1
I looked under my lower engine housing and there is an open stud (item 3 - adapter stud 031416, that secures cylinder/crankcase to lower engineer housing) that does not have a lock washer or nut on it to secure it to the housing. There is a wire with a round terminal hanging next to the extended stud. Might be 1/4 20 or 5/16 20 or 5/16 24. The threads are slightly marred to start a nut. I can't find the part number for the nut and lock washer.

Does anyone know where this nut is shown in diagrams? and what the part number, size and thread count is?
 

jbuote

Lieutenant Junior Grade
Joined
Aug 17, 2016
Messages
1,001
Have you tried looking in the Exhaust Housing section for the nut and washer?
​I don't know the model you have, and it may be the same for all, but I see item #31 on the Exhaust housing diagram with the same part number you listed.

​The adapter for the power head (and it's gasket) are listed in the Exhaust housing diagram as far as I can tell...

​Not an expert, and not saying the #31 I saw is the same, but maybe you can find what you need there?? :noidea:

​Hope it helps..
 
Top