I am working on a 1994 or so Force 70hp.
The engine runs on two cylinders #1 and #3. All three cylinders have about the same compression, about 115 on all 3. Spark is good on all 3.
I put #2 on tdc and pressurized the cylinder and got about 10% leakage but nothing out the exhaust. #2 appears to have water on the spark plug.
What would the chances be of:
1. bad reeds causing #2 to suck in water.
2. Bad head gasket.
3. bad exhaust gasket.
4. powerhead gasket.
Or any other thoughts on why just #2 has water in it??
The engine runs on two cylinders #1 and #3. All three cylinders have about the same compression, about 115 on all 3. Spark is good on all 3.
I put #2 on tdc and pressurized the cylinder and got about 10% leakage but nothing out the exhaust. #2 appears to have water on the spark plug.
What would the chances be of:
1. bad reeds causing #2 to suck in water.
2. Bad head gasket.
3. bad exhaust gasket.
4. powerhead gasket.
Or any other thoughts on why just #2 has water in it??