1991 50 hp johnson vro

[papamike]

I need help. I removed the oil tank from my boat so I could premix. I also removed the two wires from the oil tank. Which wires do I remove to stop the low oil alarm . Any and all help would be great thanks.

 

[tashasdaddy]

Re: 1991 50 hp johnson vro

VRO conversion w/ pump still working

if the fuel side on your Pump is still working it is very simple. unplug the 2 line harness going to the oil tank, unplug the 3 or 4 wire harness, going to the Vro pump. cut and cap the oil line going into the motor. add oil to fuel tank, mix well, then remove fuel line at top carb, catching gas in a container, pump the fuel line bulb until you get premixed gas to the carb. you can tell as it will change color. put line back on carb, and go boating.

 

[papamike]

Re: 1991 50 hp johnson vro

Thankyou for the fast response Ive done all that except the wires to the vro pump and am going to do that right now then go play on the lake. thanks so much.

 

[papamike]

Re: 1991 50 hp johnson vro

If you could please answer one more ? I went out to unplug the wires to the vro pump and cant find them. Is the vro pump the one by the carbs with the lines going to the carbs or does it look like a fuel pump at the back of the engine? which wires exactly should I unplug? thanks

 

[papamike]

Re: 1991 50 hp johnson vro

I Found It Thanks