Greetings, I recently started using my Johnson after a full rebuild on it and out of nowhere it gave me some issues. Out on the water on wot it suddenly cut the rpms in half. Was able to get it on the trailer though. Thinking not was a fuel issue cleaned all carbs and checked all fuel and vacuum lines....all good....then performed a link & since and it fired right up and adjusted the idle to between 800-850 in gear while it was backed into the water at the ramp. Went to fire it up on the paddles this last Monday and nothing. Wouldn't fire. Checked all the plugs and no spark at all on any of them. I already have a extra power pack and the coils are also brand new. Highly doubt all the coils would go at once though. Could it possibly be the kill wire or did the power pack completely take a dump on me?
P.s. it's used on a 28 ft pontoon with a 13.5x 15 prop.
P.s. it's used on a 28 ft pontoon with a 13.5x 15 prop.