1990 invader 210 dash question and part questions

V

vballman0

Recruit
Joined
Sep 25, 2017
Messages
3
Brand new to the forum so please excuse any gaffs in protocol. :) I have a 1990 Invader 20.5 boat with a 4.3 gen 1. My first question is about the dash and I will post some pics to show what I mean. All of the printing has come off of the dash and I don't know what all of the switches go to as well as the fuses. I need to replace a fuse holder and would like to replace the dash inlays while I am at it and have it torn apart. Where would I find the inlays if they are available?
Second question. My son ran the engine without muffs and I wasn't aware of it. We went out on the water and over heated of course. Consequently he has learned how to replace the impeller. LOL. Unfortunately when we removed the outdrive we found the parts and don't know where they came from. It was all found loose in the image 0452. Any help would be appreciated. Flounder season is just around the corner. If possible please respond to email as I travel alot and it is easier to get my email on my phone as opposed to logging the laptop in at a coffee shop or McDonalds. Thanks in advance for your expertise, Aaron. vballman0@gmail.com.
Apparently I am not allowed to post pics at this time so please email me and I will send them to you. Thanks.
 
achris

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Running without muffs will also burn the exhaust shutters and depending on how long he ran it, most of the rubber boots in the exhaust path and could have damaged the water pocket cover.

For inlays and switch designations you'd probably have to go back to whoever rigged the boat. Boats aren't like cars in that they are all laid out the same. Almost every boat is a unique individual and no 2 are wired the same.

Chris. ...
 
V

vballman0

Recruit
Joined
Sep 25, 2017
Messages
3
Where is the water pocket? Any chance that I could get a picture? Is it in the upper? What do I need to do to be able to post pictures?
As far as the dash goes I found a company the will make the gauge inlay in any configuration that I want. I was more interested in what each fuse holder and switch went to. From here it looks like I will have to just trace wires back to each device and mark them myself. Bummer. lol Thank you for your help. Still learning and your forum has been a great help.
 
You must log in or register to reply here.
Top