1990 Evinrude 150hp v6

G

gary85

Cadet
Joined
Oct 10, 2023
Messages
6
Hey everyone I am trying to do a carb rebuild on my outboard due to leakage. I've bought 2 different sets and cannot get the new float seats to fully screw in. Like they are bottoming out. Added is a pic of old and new seat.20240317_131244.jpg
 
G

gary85

Cadet
Joined
Oct 10, 2023
Messages
6
20240321_165438.jpg
 

Attachments

  • 20240321_165307.jpg
    20240321_165307.jpg
    1.8 MB · Views: 3
  • 20240321_165217.jpg
    20240321_165217.jpg
    2.2 MB · Views: 3
flyingscott

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,095
Yup that is probably the cheapest carb kit you found and they are nothing but trouble. hopefully you did not force that in the hole, because more than likely the threads are wrong. Sideview shows 2 different threads.
 
G

gary85

Cadet
Joined
Oct 10, 2023
Messages
6
flyingscott said:
Yup that is probably the cheapest carb kit you found and they are nothing but trouble. hopefully you did not force that in the hole, because more than likely the threads are wrong. Sideview shows 2 different threads.
Click to expand...
How can I find the correct kit please? I admit they start fine just sit about a 1/8" too high. Thanks in advance
 
R

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,829
Carburetor kits were the same year after year.----Same for crossflow V-4 and V-6.-----Most good b9at shops would have them in stock.
 
G

gary85

Cadet
Joined
Oct 10, 2023
Messages
6
gary85 said:
That's another thing... thought the part number I kept buying was wrong. Carb is stamped 334329-EO.
Click to expand...
Am very curious as to all of the additional parts and where they would go because I could never find anything like them to change out. Maybe a diagram out there somewhere but be awesome. Watched a few videos but not with same carbs. Again thanks...cheap parts going back.
 
R

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,829
??---See post #7 ----The kits are universal and not all the parts are needed to do a proper job.----Time for you to find a trustworthy shop !
 
You must log in or register to reply here.
Top