First time outboard owner and slogging my way through YouTube university to try and diagnose what’s wrong. Ran this sucker twice but had issues getting spark recently. Removed and cleaned the carbs and was able to start on muffs but then had some backfiring when starting.
Last attempt to start the flywheel started seizing. Turns but clearly struggling and then freezes up. I can turn freely with spark plugs removed but much more difficult when in. Battery and voltage to the starter motor check out at 12V. Compression between all 3 cylinders is within 10%.
Not sure what to check next and looking for some direction.
Appreciate the help!
Last attempt to start the flywheel started seizing. Turns but clearly struggling and then freezes up. I can turn freely with spark plugs removed but much more difficult when in. Battery and voltage to the starter motor check out at 12V. Compression between all 3 cylinders is within 10%.
Not sure what to check next and looking for some direction.
Appreciate the help!