1988 200hp Suzuki ? Please HELP

[DjPro]

First question: My motor is a 1988 DT-200 Exante. Is that a DTS-200 then?<br /><br />Second question: Does anyone know where I can purchase parts online for this monster?<br /><br />Third: My digital output trim tilt guage is stuck on 50. How can I troubleshoot the problem. I think it is the sending unit. I checked the voltage change at the guage and found no changes as I changed the motor position. Where can I get a new sending unit online.<br /><br />And Lastly: My RPM limits out at around 5300. I have just read a post and figured out I had the wrong plugs in (not resister type). I think I may have the wrong prop but can't seem to find a chart to find the correct size for my boat.<br /><br />I would appreciate any and all help on these matters.<br /><br />Thanks,<br />D.J.

 

[fish4970]

Re: 1988 200hp Suzuki ? Please HELP

try this link<br /> http://www.brownspoint.com/

 

[sorrydog]

Re: 1988 200hp Suzuki ? Please HELP

There was a change from 88 to 89 on the plugs, but I thought it was only the caps that got the resistors??<br /><br />Your RPM's probably has more to do with your prop selection for the boat.<br /><br />I have an extra sending unit that I will sell reasonably.<br /><br />The Exante might be known as either the 200S or 200V.<br /><br />I checked with Napa a while back and their prices were pretty good for the NKG plugs for this motor.

 

[johndezman]

Re: 1988 200hp Suzuki ? Please HELP

don't know what prop your using or the hull the motor is on or what load condition you are reporting the rpm at so we need more info.<br /><br />if your reported rpm is with full gas and water/bait tanks and full passenger load and dirty bottom, i'd be inclined to leave it alone...<br /><br />if on the other hand this is when you have only 10 gallon's of fuel left, and no one but yourself in the boat with a spotless bottom and flat calm water, then its time to play with your prop.<br /><br />tell us more about your combo