1987/35

[alleger]

I've checked by one shop. I was told that exchaust was plugged and that they could not get lower end seperated, shaft froze in bottom of pwr hd. If this is the case, what else might work other than cutting eng.in half as recamended.I was qouted 900.00$ to make these repairs.A picture of center section and approx. parts cost would be great.

 

[Walter]

Re: 1987/35

If you haven't already done so, I suggest you post this question to the outboard forum. You'll maximize your chances of receiving the info you need.<br /><br />Walt

 

[torxdrive]

Re: 1987/35

what is your problem in the first place yes if the shaft is froze in the crank yes they will have to cut it