zorb_rules
Cadet
- Joined
- Oct 28, 2010
- Messages
- 13
Hey guys sorry if this is a stupid question but I'm new to boats and outboards..Anyhow,
I was recently given a boat with an Evinrude 140 the engine started, idled and ran fine even in gear, however sounded like it was running on three cyclinders, I narrowed down the problem to what I thought was a broken wire on a coilpack. I replaced the coilpack with a brand new one however now the engine will start and idle with the starting lever raised however as soon as I lower it the engine now stalls. I've checked the plugs, leads and rest of the coilpacks and everything seems fine.
Does anyone have any ideas as to what I may have done and what to try next.
Thankyou.
I was recently given a boat with an Evinrude 140 the engine started, idled and ran fine even in gear, however sounded like it was running on three cyclinders, I narrowed down the problem to what I thought was a broken wire on a coilpack. I replaced the coilpack with a brand new one however now the engine will start and idle with the starting lever raised however as soon as I lower it the engine now stalls. I've checked the plugs, leads and rest of the coilpacks and everything seems fine.
Does anyone have any ideas as to what I may have done and what to try next.
Thankyou.